Skip to content

JBL speaker won’t turn on? Here’s how to fix it

So, your JBL speaker isn’t powering up? Before you panic or consider replacing it, let’s delve into some common reasons why this might be happening and how you can fix it.

Common Causes:

  1. Dead Battery: If your speaker relies on battery power, a drained or defective battery could be the culprit.
  2. Faulty Power Source: A malfunctioning power outlet or charger might prevent your speaker from turning on.
  3. Physical Damage: Any damage to the speaker’s internal components or exterior can interfere with its functionality.
  4. Software Glitch: Occasionally, software or firmware issues can cause your JBL speaker to fail to turn on properly.

Ways to Fix Your JBL Speaker:

 Charge the Speaker:

Ensure your speaker is adequately charged by connecting it to its charger and observing the charging indicator light. Let it charge for a while to rule out a dead battery.

Check the Charger and Cable:

Try using a different charger and cable to rule out any issues with these components. If multiple chargers fail to work, there might be an issue with the charging port.

Perform a Soft Reset:

A soft reset can often resolve minor software glitches. Hold down the Power button for about 10 seconds, then attempt to power on the speaker again.

Reset to Factory Settings:

For a more thorough reset, consider restoring your speaker to its factory settings. This process typically involves pressing specific buttons in a certain sequence. Refer to your speaker’s manual for instructions.

Inspect for Physical Damage:

Carefully examine your speaker for any visible signs of damage, both internally and externally. Recent drops or unnoticed damage could be affecting its functionality.


Don’t give up on your JBL speaker just yet! By troubleshooting the issue using these simple steps, you may be able to revive it and enjoy your favorite tunes once again.


1: How long should I charge my JBL speaker before attempting to turn it on?

It’s recommended to charge your speaker for at least a couple of hours to ensure the battery has sufficient power.

2: Can I use any charger with my JBL speaker?

While some chargers may work, it’s best to use the charger provided by the manufacturer to avoid compatibility issues.

3: What should I do if none of the troubleshooting steps work?

If you’ve tried everything and your speaker still won’t turn on, it may be time to seek professional repair services or contact the manufacturer for further assistance

Leave a Reply

Your email address will not be published. Required fields are marked *