How to fix your water-damaged phone in 8 steps

We’ve all been there – that heart-stopping moment when your phone takes an unexpected dive into water. Whether it’s a puddle, sink, or even the toilet (yikes!), water and electronics don’t mix well. But fear not! With some quick action and know-how, you can increase the chances of saving your beloved device from water damage. In this guide, we’ll walk you through the steps to take when you find yourself in this soggy situation.

How to Get Water Out of Your Phone:

1. Act Fast: Remove your phone from the liquid immediately. Every second counts to minimize damage.
2. Power Down: Turn off your phone and leave it off to prevent short circuits.
3. Remove Accessories: Take off any protective case and if possible, open the back to remove the battery, SIM card, and microSD card.
4. Dry Gently: Use a cloth or paper towel to dab your phone dry. Avoid rubbing, as it could push water further into sensitive parts.
5. No Sunbathing: Don’t bake your phone in the sun; instead, keep it in a cool, dry place.
6. Skip the Rice: Contrary to popular belief, rice isn’t the best solution. Opt for silica gel packets to absorb moisture effectively.
7. Patience is Key: Leave your phone in the silica gel packet-filled bag for 24–48 hours before attempting to power it on.
8. Test Your Phone: After drying, try turning your phone on. If it doesn’t work, charge it fully and try again. Keep an eye on it for any issues over the next week.

How to Recognize Water Damage:

• Look for water or water markings behind the screen.
• Check for corrosion at ports.
• Examine the Liquid Damage Indicator (LDI) for a red or maroon color.

FAQs:

1.Does rice fix water-damaged phones?

Rice may absorb some moisture but can introduce other issues like dust and starch into your phone’s crevices. Silica gel packets are a better option.

2.Can you blow-dry a water-damaged phone?

Blow-drying is not recommended as it may not effectively remove moisture and could damage internal components.

3.How do you remove water from a charging port?

Turn off the device, remove the case and battery (if possible), wipe with a dry towel, and let it dry with open ports facing down.

Conclusion:

Water and phones don’t mix, but with the right steps, you can increase your chances of salvaging a waterlogged device. Act quickly, dry gently, and avoid common misconceptions like using rice or blow-drying. And remember, if all else fails, our experts at  are here to help get your device back up and running.